ONKYO TX-SR501E Manual Do Utilizador

30

This chapter explains how to use the built-in tuner.

You can store your favorite radio stations as presets for con-
venient selection.

If you’re using the Worldwide model (i.e., your TX-SR501/
TX-SR501E has a VOLTAGE SELECTOR on the rear 
panel), you need to set the AM tuning interval for compati-
bility with AM broadcasts in your particular country. The ini-
tial setting is 9 kHz.

North America: 10 kHz

Other countries: 9 kHz

Note:
All presets are deleted when you change this setting.

If you selected the FM band:
The AUTO indicator appears on the display and the 
TX-SR501/TX-SR501E searches for the next station auto-
matically. Searching stops when a station is found, and the 
TUNED and FM STEREO indicators appear, as shown.

The North American model searches the FM band in 
0.1 MHz intervals. For other models it’s 0.05 MHz.

If you selected the AM band:
The frequency stops changing when you release the TUN-
ING button. The TX-SR501/TX-SR501E doesn’t automati-
cally search for AM stations. You must use the TUNING [ ] 
[ ] buttons. Press repeatedly to change the frequency one 
interval at a time, or press and hold to quickly change the 
frequency. When you’re tuned into a station, the TUNED 
indicator appears.

The North American model steps through the AM band in 
10 kHz intervals. For other models it’s 9 kHz.

CH +

In this example, the FM band has been 
selected.

The volume can typically be set to MIN, 1 
though 79, or MAX.

If you’ve selected the FM band, be careful 
that you don’t press either button for more 
than half a second, otherwise the 
TX-SR501/TX-SR501E will start search-
ing for the next station.