ONKYO TX-SR501E Manual Do Utilizador

31

Using the Tuner—Continued

Tuning into weak FM stations
If the signal strength of the station you are trying to tune into 
is poor, you may not be able to tune into that station, or recep-
tion may be noisy. In this case, press the [FM MODE] button 
to select mono mode and disable auto-tuning (the AUTO and 
FM STEREO indicators will go off), and try tuning manu-
ally.

Using RDS (European models only)
When tuned into an RDS (Radio Data System) station that's 
broadcasting PS (Program Service Name) information, the 
RDS indicator appears, as shown, and the name of the station 
appears on the display. Only European models support RDS, 
and only in areas where RDS is used. 

You can store up to 30 of your favorite radio stations as pre-
sets.

You can easily select previously stored presets as follows.

You can delete unwanted presets as follows.

Other Functions:
See page 32 for functions that you can use while listening to 
the radio.

Listening Modes:
See page 34 for information on the listening modes that you 
can use while listening to the radio.

The preset number flashes.

In this example, preset #3 has been 
selected.

The station is stored and the preset num-
ber stops flashing.

Repeat this procedure for all of your 
favorite radio stations.

In this example, the FM band has been 
selected.

In this example, preset #3 has been 
selected.

See the previous section for more infor-
mation.

In this example, preset #3 has been 
selected.

The selected preset is deleted and its num-
ber disappears from the display, as shown.