Digitech vocalistvr Manual Do Utilizador

Página de 30
9
press the
button - the Store button will begin flashing.
If you wish to store your preset to a different preset number than you currently have
selected, use the Data Entry Knob to select the preset number which you want to store
your modified preset to.
When you have selected your new preset, press 
- the preset is then stored to
that number. 
note: If you want to store the preset under the current preset number skip step 2. To exit 
flashing Store mode, make a parameter change then change programs.
Setting Harmony, Reverb, and Lead levels
Harmony Level
Press the level knob/switch until the harmony LED lights. The LCD display will show the cur-
rent Harmony level from 0 to max. The LCD display will switch back to showing the current
preset if the level control is not turned for a few seconds. You can turn the knob to change levels
any time the LED is lit beside the level you want to control. 
Reverb Level
Press the level knob/switch until the Reverb LED lights. The LCD display will show the current
Reverb level from 0 to max. The LCD display will switch back to showing the current preset if
the level control is not turned for a few seconds. You can turn the knob to change levels any time
the LED is lit beside the level you want to control.
Lead Level
The lead level adjusts how loud your uneffected voice is when harmonies are on and when the
unit is bypassed.  
If this is set to 0, your voice will not be heard in bypass. Press the level
knob/switch until the Lead LED lights. The LCD display will show the current Lead level from 0
to max. The LCD display will switch back to showing the current preset if the level control is not
turned for a few seconds. You can turn the knob to change levels any time the LED is lit beside
the level you want to control.
VOCALIST VR