MINOLTA magicolor 2 Manual Do Utilizador
Output Problems
8-25
Troubleshooting Printer Problems
n
Do the printer start-up and status pages list the interface? Is the
configuration information correct?
configuration information correct?
n
Is the interface enabled?
n
Is the appropriate protocol (or protocols) enabled?
Are all printer and protocol addresses configured correctly?
Output Problems
1200x600, 2400x600 dpi Printing Unavailable
n
The amount of RAM installed in your printer governs which reso-
lutions can be used with each media size. If you have a QMS
magicolor 2 Print System with
lutions can be used with each media size. If you have a QMS
magicolor 2 Print System with
— 24 MB RAM, you can print at 600x600 dpi resolution on all
media sizes.
— 48 MB RAM, you can print at 1200x600 dpi resolution on all
media sizes.
— 88 MB RAM, you can print at 2400x600 dpi resolution on all
media sizes.
Check the start-up page to make sure the printer has enough
RAM installed. See chapter 2, “Memory and System Software,” in the
RAM installed. See chapter 2, “Memory and System Software,” in the
Options manual for information on installing additional RAM.
n
If you have enough RAM installed, and you have configured the
printer from the control panel to print at 600x600, 1200x600, or
2400x600 dpi resolution (Administration/Engine/Def Resolution menu) but the printer continues printing at a lower resolution, you
may need additional memory allocated to the frame buffer.
printer from the control panel to print at 600x600, 1200x600, or
2400x600 dpi resolution (Administration/Engine/Def Resolution menu) but the printer continues printing at a lower resolution, you
may need additional memory allocated to the frame buffer.
To allocate the correct amount of memory, use the Memory/Quick Config menu to choose the correct resolution and paper size for your printing. See chapter 4, “Printer Configuration,” in the
Refer-
ence manual for more information.