Cortelco 586002-tp2-27f Manual Do Utilizador

 

 

 
 

 

 

586002TP227F User’s Manual

 16 

PART III ADVANCED SETTINGS 

The Advanced Settings menu gives you access to the following options:  
 RESET 

HANDSET 

 CHANGE 

PIN 

 REGISTER 

 SELECT 

BASE 

 DEREGISTER 
 

To access these options, from the idle mode: 

Press Menu/OK, and then press ▲ or ▼ until you see >Adv. Settings. 

Press Menu/OK again. Press ▲ or ▼ to choose from the list of options above. 

 

Reset Handset 

To restore your Handset to all factory preset settings: 
 

When you see >Reset handset, press Menu/OK. 

Your will see Enter HS PIN:  :____. 

Enter the 4-digit Handset PIN (preset to 0000). 

Scroll ▼ to >YES, and then press Menu/OK.  

 

Change Pin  (Handset) 

Your Handset PIN is factory preset to 0000. To prevent unauthorized adjustment of the advanced Handset settings, 

you can select a new 4-digit PIN (this is optional; you do not have to change the PIN): 

 

Scroll ▼ to >Change PIN, and then press Menu/OK. 

Your will see Enter Old PIN :____. 

Enter the current 4-digit Handset PIN. 
Enter the New Pin :____. 

Verify the New Pin :____. You will see Pin Changed. 

Press DEL/Mute twice to return to the idle screen. 

 

Registration  (of Handsets) 

Your Handset is registered to the Base at the factory. Registration allows a Handset to communicate with a Base. You 

can register 5 additional Handsets (model 588002TP227F) to the Base. To register an additional Handset to the Base: 
 

Charge the ‘new’ Handset in its cradle overnight. You will see Not Registered on the display. Place it in the Base. 

In a short while, usually 60 seconds or less, the new Handset will be registered. The Handset will be assigned a 

number, located in the lower left corner of the display.  

Press and hold PAGE on the Base (for approximately 3 seconds) until you hear a soft beep. 

In the Advanced Settings menu, scroll ▼ to >Register, and then press Menu/OK. 

You will see Select Base. Scroll ▼ to the desired Base. If you have one Base, scroll ▼ to >Base 1. Press 

Menu/OK again. 

You will see Please Wait… When prompted, Enter Base PIN:  :____. 

You will see Please Wait… A tone will confirm registration. The idle screen will be displayed.