Cortelco 586002-tp2-27f Manual Do Utilizador
586002TP227F User’s Manual
18
Press Menu/OK again. Now, press ▲ or ▼ to adjust ringer volume or select a ringer melody. Press Menu/OK to
confirm your selection.
Reset Base
In the Base Settings menu, scroll ▼ to >Reset Base, and then press Menu/OK.
You will see Reset to default. Scroll ▼ to >Yes, and then press Menu/OK.
You will see Reset to default. Scroll ▼ to >Yes, and then press Menu/OK.
You will see Base is reset to default.
Additional
In the Base Settings menu, scroll ▼ to >Additional, and then press Menu/OK.
Scroll ▼/▲ to select >Dial Mode, >Flash Time or >Prefix Dial No., and then press Menu/OK.
>Dial Mode – Press ▲ or ▼ to select >Tone or >Pulse, and then press Menu/OK to confirm your selection.
>Flash Time – Press ▲ or ▼ to select the desired flash time (preset to 600 ms), and then press Menu/OK to confirm
your selection.
>Prefix Dial No. – Enter your Base PIN. Next, enter the desired prefix number, up to 22 digits, and then press
Menu/OK. This prefix will be dialed at the beginning of every call you make. However, it will not be displayed on the
Menu/OK. This prefix will be dialed at the beginning of every call you make. However, it will not be displayed on the
screen. If you decide to stop using this feature, make sure you return to this setting, and use DEL/Mute to delete
the Prefix Dial Number!!!!!
Press DEL/Mute to return to the idle screen.
Call Barring
When you see >Call Barring, press Menu/OK. Enter the Base PIN.
Enter the number or number sequence that, if dialed, will prevent the Handset from dialing. For example, if you do not
want long distance calls to go out (calls that begin with ‘1’), simply enter 1. If you do not want any calls to go out, leave
the number field blank.
Press Menu/OK. Now, press ▲ or ▼ to select Call Barring >On.
Press Menu/OK to confirm your selection.
WARNING: To return to full dialling access, you will need to return to the Call Barring menu and select Call Barring
>Off, following the steps above.
Base Pin
Your Base PIN is factory preset to 0000. To prevent unauthorized changes to the Base Settings, you can select a new
4-digit PIN (this is optional; you do not have to change the PIN):
In the Base Settings menu, scroll ▼/▲ to >Base PIN, and then press Menu/OK.
Your will see Enter Old PIN :____. Enter the current Base PIN.
Enter the New Pin :____.
Verify the New Pin :____. You will see Base PIN is saved.
Press DEL/Mute to return to the idle screen.