Lowrance electronic 5300c Manual Do Utilizador

129

9. When all tanks have been configured, press the

ONFIGURATION

but-

ton. The following confirmation message will appear: Are you sure you
wish to change the bus configuration? Choose

and press

ENT

, Press

EXIT

to get back to the main display.

Device Configuration Menu
When a device is selected from the network devices list on the Bus Con-

figuration menu, its Device Configuration menu will appear. Device

configuration menus vary among devices. Available functions on device

configuration menus allow you to change device names, tank sizes,

fluid types and provide access to the Advanced Options menu. We will

cover configuration and calibration later in this section.
Device Information and Device Data
The Device information panel, located to the left of the Device Configu-

ration menu, displays information on the selected device that includes,

software version, model, address, serial number, instance and current

status.

If you do not have an EP-15 Fluid Level, EP-10 Fuel Flow or EP-20 En-

gine Interface on the network, the Bus Configuration menu will not

display the Engine-Tank Configuration menu, Tank Select menu, Tank

Size menu or Set Configuration button.

Device Data is shown in the Device Data window at the bottom of the

device configuration menu. The information displayed in the Device

Data window will vary among devices. If, for example, you are viewing

the device configuration menu for an EP-15 Fluid Level, the device

data window will include tank size and the amount of fuel left in the

tank. The Device Data for an EP-10 Fuel Flow includes Fuel Rate

(amount of fuel burned per hour), Fuel Used, Trip Fuel Used and Sea-

sonal Fuel Used.