Lowrance electronic 5300c Manual Do Utilizador

131 

You will use the Fill Tank command when calibrating a fuel flow and 

when filling up the tank without calibration. 
Adding Fuel to Tank 
Tank Location, Fuel Added and Add Fuel commands work together to 

keep NMEA 2000 fuel data consistent with the actual amount of fuel 

added to the fuel tank(s). 
1. Press 

|

, select 

 and press 

. 

2. The NMEA 2000 menu will appear with five options: Bus Setup, 

Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Back-

light Synchronization. Select 

 and press 

. 

3. Highlight 

 and press 

. The Tank Location menu will 

appear with up to three options: Port, Center and Starboard. 
4. Select the tank you added fuel to and press 

. 

5. Follow the steps below that apply to your tank. 
If you filled up the tank: 
A. Press the 

 button and press 

. The following message will 

appear:  Are you sure you wish to Fill Tank? Press 

. Another mes-

sage will appear: Do you wish to re-calibrate the device? Highlight 

 

and press 

. 

If you did not fill up the tank: 
B. Highlight 

 and press 

 to access the 

 dialog 

box. Use 

↑ ↓ , ← → to input the amount of fuel added to the tank and 

press 

. Select the 

 button and press 

. The following mes-

sage will appear: Are you sure you wish to Add Fuel? Highlight 

 and 

press 

. 

6. Press 

 repeatedly to get back to the main display. 

Engine Operations 
The lower half of the Fuel Management menu contains the following 

Engine Operation functions: Engine Select, Reset Calibration, Reset 

Trip and Reset Seasonal.  

Engine Select allows you to choose the desired engine when resetting 

calibration, resetting trip fuel and resetting seasonal fuel.  

Choosing the Reset Calibration command will switch fuel flow calibra-

tion settings back to factory defaults.  
1. Press 

|

, select 

 and press 

.  

www.Busse-Yachtshop.de      email: info@busse-yachtshop.de