Microtek gnc m vx2 0506 Manual Do Utilizador

 

Three symbols as below shown will be used throughout the manual to remind

you when to operate or repair this projector: 

Attention: Extra tips or useful indications

Caution: Steps against damages to your equipment

Warning: Steps to avoid personal injury

The following are Safety Instructions that should be followed strictly when setting

up and utilizing the projector: 

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not place your projector onto an unsteady trolley, stand or table.

Do not operate your projector near a water or heat source.

Only apply accessories or attachments as recommended by this manual.

Use the exact type of power as labeled on the projector. If you are not sure of

the type, you may confirm it with your dealer or local electric company.

Plug in properly the three-pin grounded plug into a grounded socket. If you

have a two-pin grounded plug, contact your dealer or electrical technician for

a replacement. Do not touch the plug with wet hands.

Failure to take the following precautions may result in sparks or fire:

Ensure the plug is free of dust before inserting it into a socket.

Insert the plug into the socket securely.

ＶＸ２．ｐ６５

02-10-18, 11:01

2