Microtek gnc m vx2 0506 Manual Do Utilizador

Never overload wall sockets, extension sockets and multiple socket

powerstrips, as this may result in sparks or fire.

Make sure that the projector is placed properly so that no one will step on the

power cord or its cables because this may damage or cause fraying.

Turn off the power of the projector and unplug its power cable from the wall

socket before cleaning. Use a damp cloth and avoid using liquid or aerosol

cleaners.

Make sure not to block the openings or slots on the projector. These open-

ings are for ventilation to keep the machine from overheating. Do not place

the projector on your sofa, carpet, any soft material, or in a closet that does

not provide ventilation.

Make sure no items or no liquid is squeezed into or spilled into the housing

slots.

Unless specially instructed in this manual, never try to do any service by

yourself. Opening the cover of the projector to perform repairs is dangerous,

especially when handling the high-voltage parts inside the machine. Be sure

to have qualified service personnel for carrying out service maintenance.

Unplug the power cord of the projector from the wall socket during a thunder-

storm or when the projector will not be operated for a long period of time. Do

not place the projector and the remote control on any heat-emitting equip-

ment or in a hot space (e.g., in a motionless car).

Under the following conditions, unplug the projector from the wall socket and

refer the problems to qualified service personnel.

If the power cable or plug is damaged or frayed,

If liquid spills into the projector or if it has been exposed to rain,

If the projector is not able to work although you have followed the

setup instructions,

If the performance of the projector has a noticeable change and

needs repair,

If the projector has been dropped or the cabinet has been damaged.

ＶＸ２．ｐ６５

02-10-18, 11:01