Microtek gnc m vx2 0506 Manual Do Utilizador

Operation method: Under the OSD menu, utilize the Direction key on the

top operation panel to select the icon representing the setting that needs to

be revised.  Press the LEFT CLICK or RIGHT CLICK key on the remote

control or the ENTER key on the control panel.  Then revise the settings.

Next, press the LEFT CLICK or RIGHT CLICK key on the remote control for

confirmation and the MENU key to go back to OSD menu.

Adjusting the setting of brightness will make the whole projected image

brighter or darker.  The image will be brighter by increasing the Brightness

value and darker by decreasing the value.

Adjusts the scale of the black color in the projected image.  The higher the

value of the Black Level, the darker the image will be.

Adjusts the contrast between the light and dark regions in the projected

image.  If the Contrast value is high, the light regions will appear lighter and

the dark regions will appear darker.  If the value is low, the contrast between

light and dark regions will not be as obvious.

After entering the “Position” icon under the OSD menu, you will see the “H-

Position” and “V-Position” bars in the “Position” box.  You may revise the

setting by using the direction key on the remote control or the Direction key

on the top operation panel and have the image projected onto the proper

position.

When entering the “H-Position” bar, you may make the horizontal

movement for the projected image.

When entering the “V-Position” bar, you may make the vertical move-

ment for the projected image.

ＶＸ２．ｐ６５

02-10-18, 11:05

34