ONKYO CR-N1 Manual Do Utilizador

Página de 64
24
Getting connected
The bundled indoor FM antenna is designed 
for indoor use only.
Using the bundled FM antenna
1. Attach the FM antenna, as shown.
Once the CR-N1 is ready for use, you’ll 
need to tune into an FM radio station and 
adjust the position of the FM antenna in 
order to achieve the best possible recep-
tion.
2. Use thumbtacks (drawing pins) or 
something similar to fix the antenna into 
position.
Using an outdoor FM antenna
If good reception cannot be achieved using 
the bundled indoor FM antenna, an outdoor 
FM antenna can be used instead, as shown.
Outdoor FM antennas work best outside, but 
good results can sometimes be obtained 
indoors by mounting in an attic or loft. 
Outdoor antenna should be located away 
from possible noise sources, such as neon 
signs, busy roads, etc.
For safety reasons, outdoor antenna should 
be situated well away from power lines.
Outdoor antenna must be grounded in 
accordance with local regulations to prevent 
electrical shock hazards. See item 14 of 
“Important safeguards” at the front of this 
manual.
Using a TV antenna
It’s best not to use the same antenna for 
both FM and TV reception, as this can cause 
interference problems. If circumstances 
demand using the same antenna, use a TV/
FM antenna splitter, as shown.
Connecting an FM antenna
U.S. and Canadian models
Other models
Strip the insulation 
from the end of the 
cable and insert the 
bare wires fully into 
the FM terminal, as 
shown.
To CR-N1
To TV or VCR
TV/FM antenna 
splitter