Clarion max983hd Manual Do Utilizador

MAX983HD

• When you enter the destination, be sure to stop 

the vehicle in a safe place.

• The displayed route is only a suggested route.
• Roads can change every day, and may have 

changed in geometries and traffic regulations 

from the date the map data is created. Be sure 
to follow the actual traffic regulations.

• It may take a little time until the suggested route 

is displayed according to the situation. 

• Even when the destination is entered by the 

Stored Routes, the current location map screen 
is displayed. When the starting point is set to a 
remote position from the vehicle position, the 
route may not be displayed on the screen.

• Roads and places where the vehicle cannot 

pass, such as roads in housing areas, site or in 
installations, and roads under construction may 
be included in the suggested route.

• The passed waypoints are not included for 

route recalculation.

• When you set waypoints, the system calculates 

the routes between every point. Therefore, the 
following notes apply:

• If a route between certain waypoints is not 

found, no route may be displayed.

• The route may not be connected in the 

vicinity of a waypoint.

• A U-turn may be required at a waypoint. 

• The route calculation may not be completed in 

the following cases:

• If there is no main road within a range of 

approx. 5 km (3 miles) from the current 
location.

• If there is no main road within a range of 

approx. 5 km (3 miles) from the destination 
(or waypoints).

• If the vehicle is too close to the destination. 

In this case, a message to inform you about 
this will be displayed.

• If it is impossible to reach the destination or 

waypoints because of traffic regulations, 
etc.

• If the map database does not contain the 

area data of the selected locations.

• If only an extremely roundabout route is 

available to reach the destination or 
waypoints.

• When displaying a route, the followings may 

occur:

• Even if a route calculation is requested on a 

main road, the start point of the suggested 
route may not exactly match the current 
vehicle location.

• If a route calculation is requested on a main 

road, the end point of the suggested route 
may not exactly match the destination.

• If a route calculation is requested on a main 

road, the system may suggest a route 
starting from another main road.
In this case, park the vehicle in a safe 
location and adjust the current location 
using Setting menu, or continue driving until 
the vehicle icon appears on a main road. If 
either of these methods are not successful, 
request a route calculation again.

• Ferry lines are stored in this system. Take 

into consideration the travel time required 
and operational condition before deciding 
whether to use them or not.

• The current location or the travelling direction 

may shift according to the travelling condition. 
It is not a malfunction, and will return to a 
normal display when keeping travelling for a 
while. 

• Though the vehicle position may shift in places 

other than the road such as in the parking lot, 
etc., it is not a malfunction. It will return to a 
normal display when travelling on an actual 
road for a while.

• In the current location display, a representative 

name of the place which is nearest to the 
vehicle position in the map database is 
displayed, it may be different from the actual 
place name.