Clarion max983hd Manual Do Utilizador

MAX983HD

• The voice guidance may not match the actual 

roads or regulations. The cause of this can be 
that the actual roads and the data in the map 
database are different, or the vehicle speed.

• If the content of the voice guidance does not 

match the actual roads or regulations, follow 
the information acquired from the actual traffic 
or road signs.

• The voice guidance is activated only for 

intersections with certain conditions. There 
may be cases that the vehicle has to turn, but 
the voice guidance is not activated.

• The content of the voice guidance may vary, 

depending on the direction of the turn and the 
type of the intersection.

• The voice guidance timing will vary depending 

on the situation.

• The voice guidance is not available when the 

voice guidance function is not set to ON. 
Moreover, even when the voice guidance 
function is set to ON, if the voice guidance 
volume is set to a very low value, the voice 
guidance may not be audible. 

➜ “Guidance 

Voice Settings” (P. 44)

• The voice guidance will start when the vehicle 

enters the suggested route. Before entering the 
route, refer to the map screen for directions.

• When the vehicle approaches a waypoint, the 

voice guidance will say “You have arrived at 
waypoint <1 to 5>”. The voice guidance will 
switch to the next route section. Please refer to 
the map screen for directions until the next 
voice guidance is started.

• When the vehicle approaches a destination, 

the voice guidance will say “You have arrived 
at the destination”. For the remainder of the 
way, please refer to the map screen for 
directions.