Fujitsu M10-4S Manual Do Utilizador

Location number

Component

CHECK LED

ID switch (SPARC M10-4S and crossbar box only)

Mode switch

Power switch

Table 2-1

Display and operation status of operation panel

LEDs/switches on
operation panel

If the SPARC M10-4S or the crossbar box is acting
as the master XSCF

If the SPARC M10-4S or the crossbar box is acting
as an XSCF other than the master XSCF

POWER LED

Enabled (Displays the start or stop status of

the SPARC M10-4S or the crossbar box)

Enabled (Displays the start or stop status of

the SPARC M10-4S or the crossbar box)

XSCF STANDBY

LED

Enabled (Displays the XSCF status of the

system)

Enabled (Displays the XSCF status of the

SPARC M10-4S or the crossbar box)

CHECK LED

Enabled (Displays an abnormal status of

the SPARC M10-4S or the crossbar box)

Enabled (Displays an abnormal status of

the SPARC M10-4S or the crossbar box)

ID switch

Enabled (Registration of ID number)

Mode switch (*)

Enabled (Mode operation of the system)

Disabled

Power switch

Enabled (Start/stop operation of the system) Disabled

*: Set the same mode for the SPARC M10-4S systems and crossbar boxes with the master XSCFand XCCFin the standby state. If the

settings are different, an asterisk (*) is displayed beside the components in the output of the showhardconf or showstatus command.

For a building block configuration, an operation panel is mounted in each chassis of

the SPARC M10-4S or the crossbar box. However, the only operation panel on which

all of the LEDs and switches are enabled is that of the chassis housing the master

XSCF.

Table 2-1

shows the display and operation status of the operation panel.

2.2.1

Display function of the operation panel

The operation panel has three LED indicators to implement its display function. The

LED indicators indicate the following. For details, see "

2.3.1 Operation panel LEDs

■

General system status

■

System error warning

■

System error location

Chapter 2

Understanding the System Components