ONKYO CDR-205X Manual Do Utilizador

44

The power does

The power cord is not properly

Plug the power cord properly into a mains

not turn on

plugged in.

power supply.

The component where the power cord is

Turn on the component into which the

plugged into is not turned on.

power cord is plugged.

No sound is

The speakers are not properly

Connect the speakers following the

output from

connected.

procedure given in "Connecting the

the speakers

CDR-205X"on page 12.

Cannot record

The components are not properly

Connect the components following the

connected.

procedure given in "Connecting the
CDR-205X"on page 12.

A finalized CD-R or CD-RW is being

Use an unfinalized disc (see page 32).

used.

The input switch is not properly set.

Switch to a properly connected input
source (see page 20, 22, 24, 26, 28).

The recording level adjustment is

Adjust the recording level to a proper level

set too low.

(see page 29).

Recorded

The components are not properly

Connect the components following the

sound is

connected.

procedure given in "Connecting the

distorted

CDR-205X"on page 12.

Recording is being affected by

Either turn off the television or move the

the television.

CDR-205X away from the television.

The disc is damaged or cracked.

Use another disc.

The recording level adjustment is

Adjust the recording level to a proper level

set too high.

(see page 29).

The disc is too dirty.

Clean the disc.

Remote controller

The remote controller batteries

Replace all the remote controller batteries

does not work

are dead.

with new batteries (see page 8-9).

There is an object between the

Remove the obstructing object (see page 8-9).

CDR-205X and the remote controller
obstructing the signals.

The remote controller is being used

Use the remote controller within its

outside of its operational range.

operational range (see page 8-9).

A track is skipped

The skip play mode is turned on.

Using the SKIP PLAY button,

during playback

turn off the skip play mode (see page 39).

A track is not

The skip play mode is turned off.

Using the SKIP PLAY button,

properly skipped.

turn on the skip play mode (see page 39).

A recorded

• The disc was not finalized

• Perform the finalization process

CD-R cannot

after recording.

(see page 32).

be played in

• The CD-R indicator lights when

normal CD

the disc is played with the

players

CDR-205X