Measurement Specialties PMD-1024HLS Manual Do Utilizador

In addition to this hardware user's guide, you should also receive the DAQ Software Quick Start 
(available in PDF at 

). Read this booklet 

completely before installing any software and hardware. 

 

As with any electronic device, you should take care while handling to avoid damage from static 
electricity. Before removing the PMD-1024HLS from its packaging, ground yourself using a wrist strap 
or by simply touching the computer chassis or other grounded object to eliminate any stored static charge. 

If any components are missing or damaged, notify Measurement Computing Corporation immediately by 
phone, fax, or e-mail. For international customers, contact your local distributor where you purchased the 
PMD-1024LS. 

ƒ

  Phone: 508-946-5100 and follow the instructions for reaching Tech Support.  

ƒ

  Fax: 508-946-9500 to the attention of Tech Support 

ƒ

  Email: 

Refer to the DAQ Software Quick Start for instructions on installing the software on the Measurement 
Computing Data Acquisition Software CD. This booklet is available in PDF at 

Before you connect the PMD-1024HLS, make sure that you are using the latest versions of the USB 
drivers. 

Before installing the PMD-1024HLS, download and install the latest Microsoft Windows updates. In 
particular, when using Windows XP, make sure you have XP Hotfix KB822603 installed. This update is 
intended to address a serious error in Usbport.sys when you operate a USB device. You can run Windows 
Update or download the update from 

. For more information, refer to the Microsoft 

Knowledge Base article "Availability of the Windows XP SP1 USB 1.1 and 2.0 update." This article is 
available at 

To connect the PMD-1024HLS to your system, turn your computer on, and connect the USB cable to a 
USB port on your computer or to an external USB hub that is connected to your computer. The USB 
cable provides power and communication to the PMD-1024HLS. 

2-2