Measurement Specialties PMD-1024HLS Manual Do Utilizador
PMD-1024HLS User's Guide
Installing the PMD-1024HLS
When you connect the PMD-1024HLS for the first time, a
Found New Hardware
popup balloon
(Windows XP) or dialog (other Windows versions) appear as the PMD-1024HLS is detected.
Another
Found
New Hardware
balloon or dialog opens that identifies the PMD-1024HLS as a USB
Human Interface Device.
When the balloon or dialog closes, the LED on the PMD-1024HLS should flash and then remain lit. This
indicates that communication is established between the PMD-1024HLS and your computer
indicates that communication is established between the PMD-1024HLS and your computer
Caution! Do not disconnect any device from the USB bus while the computer is communicating with
the PMD-1024HLS, or you may lose data and/or your ability to communicate with the
PMD-1024HLS.
PMD-1024HLS.
If the LED turns off
If the LED is lit but then turns off, the computer has lost communication with the PMD-1024HLS. To
restore communication, disconnect the USB cable from the computer, and then reconnect it. This should
restore communication, and the LED should turn back on.
If the LED is lit but then turns off, the computer has lost communication with the PMD-1024HLS. To
restore communication, disconnect the USB cable from the computer, and then reconnect it. This should
restore communication, and the LED should turn back on.
2-3