Hanna Instruments hi 9063 Manual Do Utilizador

w w w . h a n n a i n s t . c o m

WARRANTY

PRELIMINARY EXAMINATION

GENERAL DESCRIPTION

FUNCTIONAL DESCRIPTION

SPECIFICATIONS

Instruction Manual

HI 9063

Portable Waterproof

 Microprocessor

K-Type Thermocouple

Thermometer

Remove the instrument from the packing material and exam-
ine it carefully to make sure that no damage has occurred
during shipping. If there is any noticeable damage, notify
your Dealer or the nearest Hanna Office.

Note: Save all packing materials until you are sure that the

instrument functions correctly. Any defective item must
be returned in the original packaging together with
the supplied accessories.

1. Temperature probe connector
2. Liquid Crystal Display
3. ON/OFF key
4. Measuring unit selection key
5. HOLD key
6. HI/LO values reset key

HI 9063 is a waterproof, microprocessor-based, K-type ther-
mocouple thermometer, which provides very accurate
measurements in a wide range of temperatures.
The meter is also provided with low battery detection and
BEPS (Battery Error Preventing System), which turns the unit
off when the batteries are discharged avoiding erroneous
readings caused by low battery level.
HI 9063 features include autoranging capability,  dual-level
LCD for simultaneously displaying of maximum and minimum
measured temperatures, °C/°F selection button and hold
function.

The meter is supplied complete with four 1.5V AA batteries
and instruction manual.

1. Current temperature value
2. HOLD indicator
3. Low battery indicator
4. Minimum temperature value
5. Maximum temperature value
6. K-type probe indicator
7. Measuring unit, °C or °F

FACTORY RECALIBRATION

All Hanna Instruments thermometers have been accurately
pre-calibrated at the factory.
It is generally recommended to have all thermometers
recalibrated at least once a year.
For an accurate annual recalibration, contact your nearest
Hanna Service Center.

All Hanna Instruments meters are warranted for two years against de-
fects in workmanship and materials when used for their intended purpose
and maintained according to instructions. Sensors and probes are war-
ranted for a period of six months.
This warranty is limited to repair or replacement free of charge.
Damages due to accidents, misuse, tampering or lack of prescribed mainte-
nance are not covered.
If service is required, contact the dealer from whom you purchased the instru-
ment. If under warranty, report the model number, date of purchase, serial
number and the nature of the failure.
First obtain a Returned Goods Authorization number from the Customer Ser-
vice department, then return the instrument with the Authorization # included
along with shipment costs prepaid. If the repair is not covered by the war-
ranty, you will be notified of the charges.
When shipping any instrument, make sure it is properly packaged for com-
plete protection.

(*) 

Range may be limited by probe.

Hanna Instruments reserves the right to modify the design, construction and

appearance of its products without advance notice.

Dear Customer,
Thank you for choosing a Hanna product.
This manual will provide you with the necessary information
for correct operation. Please read it carefully before using the
meter. If you need additional technical information, do not
hesitate to e-mail us at tech@hannainst.com.
This instrument is in compliance with the

directives.

Range (*)

Resolution

Accuracy

Typical EMC
Deviation
Battery Type
Life
Probe
Environment
Dimensions
Weight

-50.0 to 1350°C
-58.0 to 2462°F

0.1°C (up to 199.9°C) / 1°C (outside)
0.1°F (up to 399.9°F) / 1°F (outside)

±0.2% F.S.

for 1 year, excluding probe error

±3°C / ±6°F

(with HI 766 probes)

4 x 1.5V AA (IEC LR6)

approx. 2000 hours of continuous use
K-type thermocouple (see “Accessories”)
-10 to 50ºC (14 to 122ºF); RH 100%

196 x 80 x 60 mm (7.7x3.1x2.4")

500 g (1.1 lb.)