omnitron-systems-technolo 10-100m Manual Do Utilizador

An IP address is required for the SNMP manager to address the 10/100M.  The factory default setting is
192.168.1.220.  The IP address can be configured manually or automatically as a DHCP client.

To manually configure the IP address and control parameters, select 3 from the Management Options
screen. The IP and Control Preferences screen will appear.

IP and Control Preferences Screen

iConverter, Serial Agent

 1:  Set IP

192.168.1.220

 2:  Set Subnet Mask

255.255.255.0

 3:  Set Gateway

192.168.1.1

 4:  Chassis Number

1

 5:  Chassis Name (also sysName)

10/100M

 6:  Enable/Disable TELNET

Enabled

 7:  Enable/Disable FTP

Disabled

 8:  Enable/Disable Soft Switch Reload

Disabled

 9:  TELNET Password

*****

 10: FTP    Password

 11: Serial Password

 Enter Choice, Management Options Screen(0), (H)elp, E(x)it >

To configure the IP address of the 10/100M, select 1 at the IP and Control Preferences screen, and press
<ENTER>.  Backspace over the existing value, type the new value (in x.x.x.x format), and press <ENTER>.

To configure the subnet mask of the 10/100M, select 2 at the IP and Control Preferences screen, and press
<ENTER>.  Backspace over the existing value, type the new value (in x.x.x.x format), and press <ENTER>.

To configure the gateway of the 10/100M, select 3 at the IP and Control Preferences screen, and press
<ENTER>. Backspace over the existing value, type the new value (in x.x.x.x format), and press <ENTER>.

To save the new values, select 0 and press <ENTER> to return to the Management Options screen, then
select 6 and press <ENTER> to Save Preference Changes.

To configure the IP automatically as a DHCP client, select 9 from the Management Options screen.  The
Other Networking Features screen will appear.

Page 13