omnitron-systems-technolo 10-100m Manual Do Utilizador
SNMP Preferences Screen iConverter, Serial Agent
Chassis Number = 1 SNMP Engine ID 80001CAE03000687003B19
1: sysContact
Omnitron (949) 250-6510
2: sysLocation
Irvine, CA USA
3: SNMP Writes
Enabled
SNMP v1/v2c -------------------------------------------------------------------
4: Read Community
*****
5: Write Community
*****
6: Agent
Enabled
SNMP V3 -----------------------------------------------------------------------
7: Agent
Enabled
8: User 1 name (read only)
guest
9: User 2 name (read/write) admin
10: User 1 Security
noAuthNoPriv
13: User 2 Security
noAuthNoPriv
11: User 1 Privacy pwd
*****
14: User 2 Privacy pwd
*****
12: User 1 Authen. pwd
*****
15: User 2 Authen. pwd
*****
Traps Hosts -------------------------------------------------------------------
16: Address 1 255.255.255.255 20: Address 5 255.255.255.255
17: Address 2 255.255.255.255 21: Address 6 255.255.255.255
18: Address 3 255.255.255.255 22: Address 7 255.255.255.255
19: Address 4 255.255.255.255 23: Address 8 255.255.255.255
Enter Choice, Management Options Screen(0), (H)elp, E(x)it >
3.4.2.1
Setting SNMPv1/v2c Read and Write Community Names
The 10/100M is shipped from the factory with the SNMP agent enabled with the default SNMP Read and
Write Community name as “public”. See Section 3.4 for all factory default settings.
Write Community name as “public”. See Section 3.4 for all factory default settings.
The SNMP Read Community Name is necessary for reading data from the 10/100M. The name can be any
1-32 character alphanumeric string. To set the SNMP Read Community Name, select 4 at the SNMP
Preferences screen, press <ENTER> and then follow the screen prompts.
1-32 character alphanumeric string. To set the SNMP Read Community Name, select 4 at the SNMP
Preferences screen, press <ENTER> and then follow the screen prompts.
The SNMP Write Community Name is necessary for writing data to the 10/100M. The name can be any
1-32 character alphanumeric string. To set the SNMP Write Community Name, select 5 at the SNMP
Preferences screen, press <ENTER> and then follow the screen prompts.
1-32 character alphanumeric string. To set the SNMP Write Community Name, select 5 at the SNMP
Preferences screen, press <ENTER> and then follow the screen prompts.
To save the new values, select 0 and press <ENTER> to return to the Management Options screen, then
select 6 and press <ENTER> to Save Preference Changes.
select 6 and press <ENTER> to Save Preference Changes.
3.4.2.2
Setting SNMPv3 Parameters
SNMPv3 implements a security model that provides for message integrity, authentication, and encryption.
Authentication for SNMPv3 is provided through a unique User Name and Authentication Password for
each access level.
each access level.
Two access levels or accounts are available; Read-Only Level (User 1) and Read and Write Level (User 2).
User 1 is allowed to request information from the module. User 2 is allowed to request information from
and set configuration to the module. To set the User 1 name, select 8 at the SNMP Preferences screen,
press <ENTER> and then follow the screen prompts. To set the User 2 name, select 9 at the SNMP
Preferences screen, press <ENTER> and then follow the screen prompts. The 10/100M is shipped with
default values pre-assigned. See Section 3.4 for all factory default settings.
User 1 is allowed to request information from the module. User 2 is allowed to request information from
and set configuration to the module. To set the User 1 name, select 8 at the SNMP Preferences screen,
press <ENTER> and then follow the screen prompts. To set the User 2 name, select 9 at the SNMP
Preferences screen, press <ENTER> and then follow the screen prompts. The 10/100M is shipped with
default values pre-assigned. See Section 3.4 for all factory default settings.
The module supports the three levels of Authentication and Encryption (Security Levels) for User 1 and
User 2; noAuthNoPriv, authNoPriv and authPriv. noAuthNoPriv uses username for authentication,
User 2; noAuthNoPriv, authNoPriv and authPriv. noAuthNoPriv uses username for authentication,
Page 17