omnitron-systems-technolo 10-100m Manual Do Utilizador

IP and Control Preferences Screen

iConverter, Serial Agent

 1:  Set IP

192.168.1.220

 2:  Set Subnet Mask

255.255.255.0

 3:  Set Gateway

192.168.1.1

 4:  Chassis Number

1

 5:  Chassis Name (also sysName)

10/100M

 6:  Enable/Disable TELNET

Enabled

 7:  Enable/Disable FTP

Disabled

 8:  Enable/Disable Soft Switch Reload

Disabled

 9:  TELNET Password

*****

 10: FTP    Password

 11: Serial Password

 Enter Choice, Management Options Screen(0), (H)elp, E(x)it >

To save the new values, select 0 and press <ENTER> to return to the Management Options screen, then
select 6 and press <ENTER> to Save Preference Changes.

To set the  SNMP Preferences for the 10/100M module, select 4 from the Management Options screen,
press <ENTER> to enter the SNMP Preferences screen.

Management Options

iConverter, Serial Agent

 Network Management

 1:  Chassis and Module Management

 2:  Set Module Identifier

 Management Module Preferences

 3:  IP and Control Preferences

 4:  SNMP Preferences

 5:  Abandon Preference Changes

 6:  Save Preference Changes

 7:  Restore to Factory Defaults

 8:  Restart Management Module

 9:  Other Networking Features

 Management Module Maintenance

 10: Firmware Update

 11: Set Date/Time

 IP Address     = 192.168.1.220

 Chassis Number = 1

Enter Choice, (H)elp, E(x)it > 4

Page 16