Honeywell MS-9200UDLSE Manual Do Utilizador

Programming

122

MS-9200UDLS   PN 52750:A    11/04/05

Pressing 2 while viewing Maintenance Screen #1 will cause the following screen to be 
displayed:

The History feature allows the operator to view control panel events which have been 
stored in a history file in memory and erase the contents of the history file

Pressing 1 while viewing the History screen will cause the following screen to be 
displayed:

To view all the events which have occurred in the control panel since the history file 
was last erased, press 1 while viewing the Events screen.  To view only alarms which 
have occurred, press 2 while viewing the Events screen.  To view events other than 
alarms, press 3.  The most recent event will be displayed on the screen.  To view all of 
the selected events, press the up or down arrow keys to scroll through the list of events.  
If no events have occurred, the display will read NO EVENTS IN HISTORY.  

Pressing 2 while viewing the History Screen will cause the following screen to be 
displayed: 

Pressing 1 while viewing the Erase History Screen will cause the message ERASING 
HISTORY, PLEASE WAIT to be displayed.  The display will then return to the History 
Screen.  Pressing 2 will cause the display to return to the History Screen without 
erasing the History file.

    PROGRAMMING
1=POINT PROGRAM
2=HISTORY
3=PROGRAM CHECK

Maintenance Screen #1

      HISTORY
1=VIEW EVENTS
2=ERASE HISTORY

      HISTORY
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS

   ERASE HISTORY
     PROCEED ?
1=YES            2=NO