Honeywell MS-9200UDLSE Manual Do Utilizador

Programming

MS-9200UDLS   PN 52750:A    11/04/05

81

The Trouble Reminder features causes the control panel piezo to sound a reminder 
‘beep’ for alarms and troubles, after the panel has been silenced.  Refer to  "System 
Setup" on page 80, for a detailed description of this feature.  Pressing 1 while 
viewing System Setup Screen #1 will cause the display to toggle to Trouble Rem 
On, which enables this feature.  Each press of the 1 key will cause the display to 
toggle between Trouble Rem On and Trouble Rem Off.

The top line of the display, which appears when the control panel is in normal mode, 
can be changed by using the Banner option.  Pressing 2 while viewing System Setup 
Screen #1 will cause the following to be displayed: 

Pressing 1 while viewing the Banner Screen will select the factory default banner 
setting and display the following screen:

Pressing the Enter key will store this selection in nonvolatile memory and return the 
display to the Banner Screen.

Pressing 2 while viewing the Banner Screen will cause the following screens to be 
displayed: 

These screens allow the programmer to enter a two line custom banner.  A flashing 
cursor will appear in the bottom left corner of each display.  A maximum of 20 
characters (including spaces) can be entered into each screen for a total of two lines 
with 40 characters.  After entering up to 20 characters in the first screen, press Enter 

      BANNER
1=FACTORY
2=USER DEFINED

    BANNER
1=FACTORY
2=USER DEFINED

Banner Screen

   FACTORY BANNER
HONEYWELL LIFE SAFETY

USER DEFINED BANNER

PRESS ENTER IF OK

USER BANNER - LINE 2
PRESS ENTER IF OK
************