Honeywell MS-9600UDLSE Manual Do Utilizador

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

97

Programming

Pressing 1 for Zones Installed, while viewing Zone Setup Screen #2, will display a screen similar to 
the following: 

This display will show all of the zones that have been programmed into the control panel.  Note that 
an up and/or down arrow may appear in the upper right corner of the display, indicating that addi-
tional screens of zone information exists.  Press the up or down arrow keys to view the additional 
zones.

Pressing 2 for Zones Enabled, while viewing Zone Setup Screen #2, will display a screen similar to 
the following: 

This display will show all of the zones that are enabled in the control panel.  Note that an up and/or 
down arrow may appear in the upper right corner of the display, indicating that additional screens 
of zone information exists.  Press the up or down arrow keys to view the additional zones.

Pressing 3 for Zones Disabled, while viewing Zone Setup Screen #2, will display a screen similar 
to the following: 

This display will show all of the zones that are disabled in the control panel.  Note that an up and/or 
down arrow may appear in the upper right corner of the display, indicating that additional screens 
of zone information exists.  Press the up or down arrow keys to view the additional zones.

    ZONE SETUP

1=ZONES INSTALLED

2=ZONES ENABLED

3=ZONES DISABLED

Zone Setup Screen #2

  ZONES INSTALLED

00 01 02 03 04 05 

  ZONES ENABLED

00 01 02 04 05 06 07

08 09 10 11 12 13 14

15 16 17 18 19 20 21

  ZONES DISABLED

03