Honeywell MS-9600LSE Manual Do Utilizador

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

101

Programming

Pressing 2 for System Setup, while viewing Programming Screen #2, will cause the following 
screens to be displayed: 

The Trouble Reminder features causes the control panel piezo to sound a reminder ‘beep’ for 
alarms and troubles, after the panel has been silenced.  Refer to “System Setup” on page 100, for a 
detailed description of this feature.  Pressing 1 while viewing System Setup Screen #1 will cause 
the display to toggle to Trouble Rem On, which enables this feature.  Each press of the 1 key will 
cause the display to toggle between Trouble Rem On and Trouble Rem Off.

The top line of the display, which appears when the control panel is in normal mode, can be 
changed by using the Banner option.  Pressing 2 while viewing System Setup Screen #1 will cause 
the following to be displayed: 

    PROGRAMMING

1=LOOP SETUP

2=SYSTEM SETUP

3=VERIFY LOOPS

Programming Screen #2

    SYSTEM SETUP

1=TROUBLE REM    OFF

2=BANNER

3=TIME-DATE

    SYSTEM SETUP

1=TIMERS

2=NAC

3=RELAYS

    SYSTEM SETUP

1=CANADIAN OPT.   OFF

2=WATERFLOW SIL.  NO

      BANNER

1=FACTORY

2=USER DEFINED