KYOCERA FS-9530DN Manual Do Utilizador

Avoid placing the machine on or in locations which are unstable 
or not level. Such locations may cause the machine to fall down 
or fall over. This type of situation presents a danger of personal 
injury or damage to the machine. 

Avoid locations with humidity or dust and dirt. If dust or dirt 
become attached to the power plug, clean the plug to avoid the 
danger of fire or electrical shock.

Avoid locations near radiators, heaters, or other heat sources, or 
locations near flammable items, to avoid the danger of fire.

To keep the machine cool and facilitate changing of parts and 
maintenance, allow access space as shown below. Leave 
adequate space, especially around the vents, to allow air to be 
properly ventilated out of the printer.

Always use the caster stoppers to stabilize the printer once it is 
in place to keep it from moving and/or falling over and causing 
injury.

Adverse environmental conditions may affect the safe operation and 
performance of the machine. Install in an air-conditioned room 
(recommended room temperature: around 23°C, humidity: around 60% 
RH), and avoid the following locations when selecting a site for the 
machine.

•

Avoid locations near a window or with exposure to direct sunlight. 

Left: 300 mm

(12 inches)

Right: 300 mm

(12 inches)

Rear: 100 mm

(4 inches)

Front: 1,000 mm

(40 inches)