KYOCERA FS-9530DN Manual Do Utilizador

•

Avoid locations with vibrations. 

•

Avoid locations with drastic temperature fluctuations. 

•

Avoid locations with direct exposure to hot or cold air.

•

Avoid poorly ventilated locations.

•

When casters are installed on the printer, moving the printer can 
cause damage to certain floor surfaces.

During printing, some ozone is released, but the amount does not cause 
any ill effect to one's health. If, however, the printer is used over a long 
period of time in a poorly ventilated room or when printing an extremely 
large number of copies, the smell may become unpleasant. To maintain 
the appropriate environment for print work, it is suggested that the room be 
properly ventilated.

Do not use a power supply with a voltage other than that 
specified. Avoid multiple connections in the same outlet. These 
types of situations present a danger of fire or electrical shock. 

Plug the power cord securely into the outlet. If metallic objects 
come in contact with the prongs on the plug, it may cause a fire 
or electric shock. 

Always connect the machine to an outlet with a ground 
connection to avoid the danger of fire or electrical shock in case 
of an electric short. If an earth connection is not possible, contact 
your service representative. 

Connect the power plug to the closest outlet possible to the machine.

The power supply cord is used as the main disconnect device. Ensure that 
the socket/outlet is located/installed near the equipment and is easily 
accessible.