Kenwood TM-281E Manual Do Utilizador

8

Are you ready to give your transceiver a quick try?  
Reading this section should get your voice on the 
air right away.  The instructions below are intended 
only as a quick guide.  If you encounter problems 
or there is something you would like to know more, 
read the detailed explanations given later in this 
manual.

1

 Press [   ] (Power) briefly to switch the transceiver 

power ON.

•  A high pitched double beep sounds and a Power-on 

message appears momentarily.  The various indicators 
and the current operating frequency appear on the LCD.

•  The transceiver stores the current parameters when it is 

turned OFF and automatically recalls those parameters 
the next time you turn the transceiver ON.

2

 Turn the Volume control clockwise, to the 12 o’clock 

position.

3

 Turn the Tuning control to select a reception 

frequency.

•  You may further turn the Volume control to adjust the 

volume level of the signal.

4

  To transmit, hold the microphone approximately 5 cm 

(2 inches) from your mouth.

5

  Press and hold Mic [PTT], then speak in your normal 

tone of voice.

6

 Release Mic [PTT] to receive.

7

 Repeat steps 

4

, 

5

, and 

6

 to continue 

communication.

1 2

3

6

5