Kenwood TM-281E Manual Do Utilizador

9

  This section describes only the main functions of the front 

panel controls.  Explanations for functions not described here are 
provided in the appropriate sections of this instruction manual.

.

;

=

B

>

:

@

q   (Power) switch/ Volume control

 

Press to switch the transceiver power ON or OFF  
{page 14}.

 

Turn to adjust the level of the receive audio from the 
speaker {page 14}.

w MENU button/ Tuning control

 

Press to enter MHz Mode {page 16}.  In this mode, 
you can change the operating frequency in 1 MHz 
steps using the 

control or Mic 

/

.  

Press and hold for 1 second while in VFO Mode to 
begin MHz Scan {page 41} or while in MR Mode to 
begin Group Scan {page 42}.

 Press 

 then press 

 to enter Menu Mode 

{page 18}.

 

Turn to select:

•  Operating frequencies when in VFO Mode {page 15}.
•  Memory Channels when in Memory Recall Mode 

{page 30}.

•  Menu Nos. when in Menu Mode {page 18}.
•  Scan direction while scanning {pages 27, 39, 47, 49}.

e CALL key

 

Press to recall the Call Channel {page 35}.  Press and 
hold for 1 second while in VFO Mode to begin Call/
VFO Scan {page 43}.  Press and hold for 
1 second while in Memory Recall Mode to begin Call/
Memory Scan {page 43}.

 Press 

 then press 

 to activate the Tone {page 

24}, CTCSS {page 46}, or DCS {page 48} function. 

r VFO key

 

Press to enter VFO Mode {page 15}.  In this mode, 
you can change the operating frequency using the 

control or Mic 

/

.  Press and hold for 

1 second while in VFO Mode to begin Band Scan {page 
40}.  Press and hold for 1 second while in VFO Mode 
after programming a scan range to begin Program 
Scan {page 40}.