Kenwood TK-5410 Manual Do Utilizador

2

Note:  Scan programming is only available when using 

Conventional operation.

■

 

If Scan Type has been programmed for Conventional 

operation, you are able to reprogram your scan list.
1  Press the key programmed as Scan Program.

•  The 

 icon appears on the display and blinks.

2  Press the Side 2 and Side 3 keys to select the zone or 

channel you will add to or remove from the scan list.

•  The 

 icon appears on the display for zones/ channels 

that are added to the scan list.

•  Press the 

A key to toggle between Zone Select and 

Channel Select.

3  Press the <C key to add the selected zone or channel to 

the scan list or the 

B key to remove the selected zone 

or channel from the scan list.

•  The 

 icon appears on the display when a zone/ channel 

is added to the scan list, and disappears when a zone/ 

channel is removed from the scan list.

4  Press the Side 1 key to exit scan programming.

 

If the Priority channel has been set as Operator Selectable 

by your dealer, you are also able to reprogram the Priority 

mode.
1  Press the key programmed as Scan Program.

•  The 

 icon appears on the display and blinks.

2  Press and hold the A key for 2 seconds to edit the 

Priority channel.

3  Press the Side 2 and Side 3 keys to select the channel 

you will set as the Priority channel.