Kenwood TK-5410 Manual Do Utilizador

2

A Priority channel must be programmed in order for Priority 

Scan to function.
When using a single Priority channel, the transceiver will 

automatically change to the Priority channel when a call is 

received on it, even if a call is being received on a normal 

channel.
When using dual Priority channels, Priority channel  is given 

precedence over Priority channel 2.  So, if a call is received on 

Priority channel  while a call is already on Priority  

channel 2, the transceiver will automatically change to Priority 

channel .

•  On K2/K3/K/K/K7 model transceivers, “P” appears on the 

display when the channel is Priority channel , “P2” appears when 

the channel is Priority channel 2, and “PP” appears when the 

channel is both Priority channel  and Priority channel 2.

The Scan Revert channel is the channel selected when you 

press the 

PTT switch to transmit during scan.  Your dealer can 

program one of the following Scan Revert channels:
• 

Selected:  The last channel selected is assigned as the 

new revert channel.

• 

Selected + Talkback:  If the channel has been changed, 

the newly selected channel is assigned as the new revert 

channel.  The transceiver “talks back” on the current 

channel.

• 

Priority 1/ Priority 2:  If your dealer has programmed a 

Priority channel (either Priority  or Priority 2), this channel 

is the revert zone and channel.

• 

Priority 1 + Talkback/ Priority2 + Talkback:  If your 

dealer has programmed a Priority channel (either Priority  

or Priority 2), this channel is the revert zone and channel.  

The transceiver “talks back” on the current receive channel.

• 

Last Called:  The last channel on which you made a call is 

assigned as the new revert channel.