Brother MFC-6800 Manual Do Utilizador

      A S S E M B L Y   A N D   C O N N E C T I O N S

When you are installing an external two-line telephone answering device 
(TAD) and a two-line telephone, your MFC must be isolated on one line at both 
the wall jack and at the TAD. The most common connection is to put the MFC 
on Line 2. The two-line TAD must have two telephone jacks: one labeled L1 or 
L1/L2, and the other labeled L2, which is explained in the following Steps. You 
will need at least three telephone line cords, the one that came with your MFC 
and two for your external two-line TAD. You will need a fourth line cord if you 
add a two-line telephone.

Place the two-line TAD and the two-line telephone next to your MFC.

Plug one end of the telephone line cord for your MFC into the L2 jack of the 
triplex adapter. Plug the other end into the LINE jack on the left side of the 
MFC.

Plug one end of the first telephone line cord for your TAD into the L1 jack of 
the triplex adapter. Plug the other end into the L1 or L1/L2 jack of the two-line 
TAD. 

Plug one end of the second telephone line cord for your TAD into the L2 jack 
of the two-line TAD. Plug the other end into the EXT. jack on the left side of 
the MFC.

You can keep two-line telephones on other wall outlets as always. There are two 
ways to add a two-line telephone to the MFC’s wall outlet. You can plug the 
telephone line cord from the two-line telephone into the L1+L2 jack of the 
triplex adapter.  Or, you can plug the two-line telephone into the TEL jack of the 
two-line TAD.