Brother MFC-6800 Manual Do Utilizador

      R E M O T E   F A X   O P T I O N S

Follow the commands below to access features remotely. When you call the 
MFC and enter your Remote Retrieval Access Code (1 5 9  ), the system will 
signal you with two short beeps to enter a remote command.

1  OFF

If you hear one long beep, the change is 
accepted. If you hear three short beeps, you 
cannot change it because the conditions have 
not been met (Example: registering paging 
number). You can register your fax forwarding 
number by using 4. FAX FWD NO. (see page 
9-5). Once you have registered the number, the 
MFC will change automatically to 
FAXFWD:ON mode.

2  Fax Forwarding

3  Paging

4  FAX FWD No.

6  Fax Storage ON

You can turn FAX STORAGE to ON or OFF.

7  Fax Storage OFF

2  Retrieve all faxes

Enter the number of a remote fax machine to 
receive stored fax messages. (See page 9-5.)

3  Erase faxes from the 
    memory

If you hear one long beep, you can erase fax 
message(s) from the memory.

1  FAX

You can check whether your MFC has received 
any faxes. If yes, you will hear one long beep. 
If no, you will hear three short beeps.

1  EXT.TEL/TAD

If you hear one long beep, you can change the 
Receive Mode. 
If you hear three short beeps, you cannot 
change it.

3  FAX ONLY

Exit

After a long beep, you can exit Remote 
Retrieval.