Brother MFC-6800 Manual Do Utilizador

R E M O T E   F A X   O P T I O N S      

Enter your Remote Access Code when the MFC picks up your call, so you can 
access features remotely.  The access code is preset to 1 5 9  , but you can 
change this. (See 

, page 5-4.)

Press Menu/Set, 2, 5, 3.

Enter a three-digit number from 000 to 
999, and then press Menu/Set. The “ ” 
cannot be changed. (Do not use the same digits that appear in your Fax Receive 
Code or Telephone Answer Code.)

Press Stop/Exit.

You can call your MFC from any fax machine using touch tone, then use the 
Remote Retrieval Access Code and other button presses to retrieve fax 
messages. Cut out the Remote Retrieval Access Card on the last page and keep 
it in your wallet as an aid.

Dial your fax number from a fax machine using touch tone.

When your MFC answers, immediately enter your Remote Retrieval Access 
Code (1 5 9  ).

The MFC signals the kinds of messages received:

The MFC then prompts you with two short beeps to enter a command.  If you 
wait longer than 30 seconds to enter a command, the MFC hangs up.  If you 
enter an invalid command, the MFC beeps three times.

Press 9 0 to reset the MFC when you’re finished.

Hang up.

If your MFC is set to 

 mode, you can access it by waiting about 2 

minutes, and then entering the Remote Retrieval Access Code within 30 
seconds.

3 . R E M O T E   A C C E S S