Jacuzzi j-300 j-335 Manual Do Utilizador

23

A. 

leD Display: Can 

display current water 

temperature (default 

display), water 

temperature set point, 

selected filtration/

heating mode, and error 

messages.

B. 

warmer ( ) Button: Increases water temperature set point.

C. 

Cooler ( ) Button: Decreases water temperature set point.

D. 

light on/off   Button options: Turns waterfall, footwell light, 

lighted cup holders and backlit pillows on in unison. Press once for 

high intensity; press a second time for medium intensity; press a third 

time for low intensity; press a fourth time to turn off. The displayed 

color is changed using the light mode button (E) below.

E. 

light mode   Button: Selects one of 4 color modes for waterfall, 

footwell, cup holders, and pillow lights. See page 26 for addition 

information.

F. 

Jets 1 Button: Turns jets pump #1 on and off. Press once for low 

speed; press a second time for high speed; press a third time to turn 

pump off.

G. 

Jets 2 Button (J-335 to J-375): Turns high-speed jets pump #2 on 

and off. Press once to turn pump #2 on; press a second time to turn 

pump #2 off.

H. 

Heat Indicator: Lit when heater is on.

Temperature Adjustment: 65 to 104°F (18 to 40°C). Factory default 

• 

setting is 100°F (38°C). 

Light Operation: All LED lights run for 2 hours, then automatically 

• 

shut off.

Jets 1/Jets 2 Button Operation: Jets run for 20 minutes when 

• 

activated, then turn off automatically to conserve energy. Simply 

press either jets button to continue operation for an additional 20 

minutes.