Nortel Networks meridian m3905 Manual Do Utilizador
40
Answer a call
Note 1:
If
Automatic Hold
is enabled, the
active call is automatically put on Hold
when you answer the second call.
when you answer the second call.
Note 2:
On the Meridian SL-100,
Automatic Hold is the default feature.
Note 3:
The caller hears music, if music is
configured on your system.
To retrieve a call on hold:
Press the
DN
Key beside the flashing
LCD indicator.
Use Call Park
Call Park allows a call to be held temporarily, then retrieved from any other DN.
You can park an incoming call, then page the called party. When you use Call
Park you do not tie up a line. Your office may have a System Park DN where most
calls get automatically parked.
If configured network wide, Call Park can be used across networks.
You can park an incoming call, then page the called party. When you use Call
Park you do not tie up a line. Your office may have a System Park DN where most
calls get automatically parked.
If configured network wide, Call Park can be used across networks.
To Park a call on the System Park
Extension or your own DN:
Extension or your own DN:
While on an active call, press the
Park
Key.
Note 1:
If there is a System Park DN, the
call automatically parks on the System Park
DN. Otherwise, it parks on your Individual
DN.
DN. Otherwise, it parks on your Individual
DN.
Note 2:
On the Meridian SL-100, press
the Park Key and you receive a
confirmation tone that the feature is on and
holding the call. Press the Park again or the
Goodbye Key to complete the Call Park
process.
confirmation tone that the feature is on and
holding the call. Press the Park again or the
Goodbye Key to complete the Call Park
process.
2498
Park