Hotpoint wd71 Manual Do Utilizador

21

If at anytime the following error messages are displayed in the Infobubble™ please follow our

recommendations before calling a Service Engineer.

Error Code

Problem

Recommendation

No hot/cold fill.

Check the water supply, inlet 

valve and hot and cold hose 

connections (see ‘Connect to the 

Water Supply’ on page 6).

A fault with the water heating 

Call for a Service Engineer.

has occurred.

Water is not being pumped out 

Check the drainage hose is 

and a flood condition could occur.

raised to the recommended 

minimum height and that it is  

not blocked (see ‘Connect to a 

Drainage System’ on page 7).

If it still not working, call for a 

Service Engineer.

Extremely high water level.

Disconnect or turn off the water 

supply and ensure that the water 

level does not rise anymore. 

Call for a Service Engineer.

Door not closed properly

(see ‘Interlocking Door System’ 

on page 9).

A motor drive problem has 

Try running the programme again. 

occurred.

If the problem persists call for a 

Service Engineer.

Customer language and wash 

Call for a Service Engineer to 

programme have not been  

re-program your appliance.

saved,system will run with default 

conditions (1000rpm max and 

English language).

E10

E11

E13

E14

E15

E16

E17

E30

E31

E50

E51