ZyXEL Communications prestige 314 plus Manual Do Utilizador
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
2-6
Hardware Installation & Initial Setup
2.6 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
next.
next.
Table 2-3 Main Menu Commands
OPERATION KEYSTROKE(S)
DESCRIPTION
Move down to
another menu
another menu
[ENTER]
To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
submenu and press [ENTER].
Move up to a
previous menu
previous menu
[ESC]
Press the [ESC] key to move back to the previous menu.
Move to a “hidden”
menu
menu
Press the [SPACE
BAR] to change No
to Yes then press
[ENTER].
BAR] to change No
to Yes then press
[ENTER].
Fields beginning with “Edit” lead to hidden menus and have a
default setting of No. Press the [SPACE BAR] to change No to
Yes, then press [ENTER] to go to a “hidden” menu.
default setting of No. Press the [SPACE BAR] to change No to
Yes, then press [ENTER] to go to a “hidden” menu.
Move the cursor
[ENTER] or
[Up]/[Down] arrow
keys
keys
Within a menu, press [ENTER] to move to the next field. You can
also use the [Up]/[Down] arrow keys to move to the previous and
the next field, respectively.
also use the [Up]/[Down] arrow keys to move to the previous and
the next field, respectively.
Enter information
Fill in, or Press the
[SPACE BAR] to
select.
[SPACE BAR] to
select.
You need to fill in two types of fields. The first requires you to type
in the appropriate information. The second allows you to cycle
through the available choices by pressing the [SPACE BAR].
in the appropriate information. The second allows you to cycle
through the available choices by pressing the [SPACE BAR].
Required fields
<
?
> or ChangeMe
All fields with the symbol <?> must be filled in order to be able to
save the new configuration.
save the new configuration.
All fields with ChangeMe must not be left blank in order to be able
to save the new configuration.
to save the new configuration.
N/A fields
<N/A>
Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
refers to an option that is Not Applicable.
Save your
configuration
configuration
[ENTER]
Save your configuration by pressing [ENTER] at the message
[Press ENTER to confirm or ESC to cancel]. Saving the data on
the screen will take you, in most cases to the previous menu.
[Press ENTER to confirm or ESC to cancel]. Saving the data on
the screen will take you, in most cases to the previous menu.
Exit the SMT
Type 99, then press
[ENTER].
[ENTER].
Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
SMT interface.