Справочник Пользователя для ZyXEL Communications prestige 314 plus

Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 

2-6 

Hardware Installation & Initial Setup 

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.  

Several operations that you should be familiar with before you attempt to modify the configuration are listed 
next. 

Move down to 
another menu 

[ENTER] 

To move forward to a submenu, type in the number of the desired 
submenu and press [ENTER]. 

Move up to a 
previous menu 

[ESC] 

Press the [ESC] key to move back to the previous menu. 

Move to a “hidden” 
menu 

Press the [SPACE 
BAR] to change No 
to Yes then press 
[ENTER]. 

Fields beginning with “Edit” lead to hidden menus and have a 
default setting of No. Press the [SPACE BAR] to change No to 
Yes, then press [ENTER] to go to a “hidden” menu. 

Move the cursor 

[ENTER] or 

[Up]/[Down] arrow 
keys 

Within a menu, press [ENTER] to move to the next field. You can 
also use the [Up]/[Down] arrow keys to move to the previous and 
the next field, respectively. 

Enter information 

Fill in, or Press the 
[SPACE BAR] to 
select.

 

You need to fill in two types of fields. The first requires you to type 
in the appropriate information. The second allows you to cycle 
through the available choices by pressing the [SPACE BAR]. 

Required fields 

<

?

 > or ChangeMe

 

All fields with the symbol <?> must be filled in order to be able to 
save the new configuration. 

All fields with ChangeMe must not be left blank in order to be able 
to save the new configuration. 

N/A fields 

<N/A> 

Some of the fields in the SMT will show a <N/A>. This symbol 
refers to an option that is Not Applicable. 

Save your 
configuration 

[ENTER] 

Save your configuration by pressing [ENTER] at the message 
[Press ENTER to confirm or ESC to cancel]. Saving the data on 
the screen will take you, in most cases to the previous menu. 

Exit the SMT 

Type 99, then press 
[ENTER]. 

Type 99 at the main menu prompt and press [ENTER] to exit the 
SMT interface.