omnitron-systems-technolo gx-tm2 Manual Do Utilizador
To change the egress rate, select option 3 for the fiber port or option 7 for the UTP port. The egress rates are
displayed. Select the desired egress rate.
displayed. Select the desired egress rate.
PI
SA
Bandwidth Control - iConverter GX/TM2 iConverter, Serial Agent
Identifier -
Chassis Number = 1
Slot Number = 12
Model Number = 8939N-0
1: 64 Kbps
17: 30 Mbps
2: 128 Kbps 18: 40 Mbps
Fiber Controls
3: 256 Kbps 19: 50 Mbps
--------------------------------------
4: 512 Kbps 20: 60 Mbps
1: Ingress CIR 1,000,000 kbps
5: 768 Kbps 21: 70 Mbps
2: Ingress CBS 150 kB
6: 1 Mbps
22: 80 Mbps
3: Egress rate 600 Mbps
7: 2 Mbps
23: 90 Mbps
4: Queueing Fair Weight
8: 3 Mbps
24: 100 Mbps
9: 4 Mbps
25: 200 Mbps
10: 5 Mbps
26: 300 Mbps
UTP Controls
11: 6 Mbps
27: 400 Mbps
--------------------------------------
12: 7 Mbps
28: 500 Mbps
5: Ingress CIR 1,000,000 kbps
13: 8 Mbps
29: 600 Mbps
6: Ingress CBS 150 kB
14: 9 Mbps
30: 700 Mbps
7: Egress rate 600 Mbps
15: 10 Mbps
31: 800 Mbps
8: Queueing Fair Weight
16: 20 Mbps
32: 900 Mbps
33: 1000 Mbps
Select Fiber Egress Rate from menu above (1-33) > 29
4.2.3
Layer 2 Control Protocol Filter
Layer 2 Control Protocol Filter provides the ability to forward, discard or tunnel L2CP frames based on the
network requirements. Select ‘forward’, ‘discard’ or ‘tunnel’ for each of the ports .
network requirements. Select ‘forward’, ‘discard’ or ‘tunnel’ for each of the ports .
The Layer 2 Control Protocol Filter is accessed by selecting option 9 from the Port configuration screen.
PI
L2CP Control - iConverter GX/TM2
iConverter, Serial Agent
Identifier -
Chassis Number = 1 Slot Number = 1 Model Number = 8939N-0
1: Fiber L2CP Ingress Control Forward
2: UTP L2CP Ingress Control Forward
3: BP A L2CP Ingress Control Forward
4: BP B L2CP Ingress Control Forward
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Page 30