omnitron-systems-technolo gx-tm2 Manual Do Utilizador
SA
L2CP Control - iConverter GX/TM2 iConverter, Serial Agent
Identifier -
Chassis Number = 1 Slot Number = 1 Model Number = 8939N-0
1: Fiber L2CP Ingress Control Forward
2: UTP L2CP Ingress Control Forward
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Select the appropriate option to configure the module for the desired operation.
4.2.4
SFP Information
The GX/TM2 module installed with an SFP will provide general and specific information on the SFP. This
information is best viewed with SNMP management software. The following is the information available:
information is best viewed with SNMP management software. The following is the information available:
4.2.4.1
SFP A0 Information Display
This section displays fixed SFP Module information for the following areas.
•
Identifier Values
•
Extended Identifier
•
Connector Values
•
Transceiver Codes
•
Encoding Rules
•
Normal Bit Rate
•
Link Length
•
Vendor Name
•
Vendor OUI
•
Vendor Revision Number
•
Laser Wavelength
•
Options
•
Vendor Serial Number
•
Date Code
•
Diagnostic Monitoring Type
•
Enhanced Options
•
SFF-8472 Compliance
4.2.4.2
SFP A2 Information Display
This section displays decoded SFP data collected for the following statistics.
•
Measured Temperature
•
Measured Vcc
•
Measured Bias
•
Measured Tx Power
•
Measured Rx Power
•
Temperature High Alarm Setting
•
Temperature Low Alarm Setting
•
Temperature High Warning Setting
•
Temperature Low Warning Setting
•
Vcc High Alarm Setting
•
Vcc Low Alarm Setting
•
Vcc High Warning Setting
•
Vcc Low Warning Setting
•
Bias High Alarm Setting
•
Bias Low Alarm Setting
•
Bias High Warning Setting
•
Bias Low Warning Setting
•
Tx Power High Alarm Setting
•
Tx Power Low Alarm Setting
•
Tx Power High Warning Setting
•
Tx Power Low Warning Setting
•
Rx Power High Alarm Setting
•
Rx Power Low Alarm Setting
•
Rx Power High Warning Setting
•
Rx Power Low Warning Setting
SFP information can be obtained by selecting option 7 from the Port configuration screen.
Page 31