Runco pl-61dhd Manual Do Utilizador
48
Runco PlasmaWall Owner’s Operating Manual
PRE
L
IMINAR
Y
Image is too bright and/or
lacks definition in the bright
areas of the image.
lacks definition in the bright
areas of the image.
• Contrast is set too high.
• Lower the contrast setting.
Image appears “washed out”
and/or dark areas appear too
bright.
and/or dark areas appear too
bright.
• Brightness is set too high.
• Lower the brightness
setting.
Colors in the image are
swapped; for example, reds
appear blue or vice versa.
swapped; for example, reds
appear blue or vice versa.
• The Red/Pr, Green/Y or
Blue/Pb outputs from the
source are connected to
the wrong inputs on the
DHD Controller.
source are connected to
the wrong inputs on the
DHD Controller.
• The Red, Green or Blue
(analog) outputs from the
DHD Controller are
connected to the wrong
inputs on the PlasmaWall.
DHD Controller are
connected to the wrong
inputs on the PlasmaWall.
• Ensure that the source
outputs are connected to
the correct DHD Controller
input.
the correct DHD Controller
input.
• Ensure that the DHD
Controller outputs are
connected to the correct
inputs on the PlasmaWall.
connected to the correct
inputs on the PlasmaWall.
RGB-HD images appear
“noisy.”
“noisy.”
• Clock and Phase settings
need adjustment.
• Adjust Clock and Phase
“Out of range” appears
on-screen.
on-screen.
• The resolution and
frequency of the video
card in the computer are
not compatible with the
PlasmaWall.
card in the computer are
not compatible with the
PlasmaWall.
• Select a compatible
The image is too large or too
small.
small.
• Image size needs
adjusting.
• Adjust the image size (refer
Table 5-1. Troubleshooting Chart (continued)
Symptom
Possible Cause(s)
Solution