caddx nx8-e Manual Do Utilizador
13
RESET FUNCTION
This function is used to reset Smoke Detectors, Zone Troubles, and Zone
Tampers.
Tampers.
Step 1
Disarm the system if not disarmed.
Step 2
Press [
7
]-[7]. Resets have now been performed.
Step 3
If the keypad begins beeping, the reset did not execute properly.
Enter your code to silence the keypad. Wait a few minutes and
repeat step 2 to attempt another reset. If the keypad still beeps after
repeated attempts, please contact your installer.
Enter your code to silence the keypad. Wait a few minutes and
repeat step 2 to attempt another reset. If the keypad still beeps after
repeated attempts, please contact your installer.
SET SYSTEM DATE
Step 1
Press the [
7
]-[9]-[6].
Step 2
Enter the “Master Code”.
Step 3
Enter the “Day of Week “
1 = Sunday
1 = Sunday
3 = Tuesday
5 = Thursday
7 = Saturday
2 = Monday
4 = Wednesday
6 = Friday
Step 4
Enter the “Month Code”. Must always be two (2) digits.
01 = January
01 = January
05 = May
09 = September
02 = February
06 = June
10 = October
03 = March
07 = July
11 = November
04 = April
08 = August
12 = December
Step 5
Enter the “Day Code”. Must always be two (2) digits.
Example: The 5
Example: The 5
th
would be entered as [0]–[5].
Step 6
Enter the last two digits of the “Year Code”.
Example: For 1997 enter [9]–[7].
Example: For 1997 enter [9]–[7].
SETTING THE SYSTEM CLOCK
Step 1
Press [
7
]-[9]-[7].
Step 2
Enter the “Master Code “.
Step 3
Enter the “hour code” which must be two (2) digits. Note: The clock
is a 24-hour clock. Refer to the following table on page 14.
is a 24-hour clock. Refer to the following table on page 14.
Step 4
Enter the “minutes code” which must be two (2) digits.
Example: 7 minutes after would be entered [0]–[7].
Example: 7 minutes after would be entered [0]–[7].