caddx nx8-e Manual Do Utilizador
14
Time
Hour Code Time
Hour Code Time
Hour Code
12:00
Midnight
00
8:00 AM
08
4:00 PM
16
1:00 AM
01
9:00 AM
09
5:00 PM
17
2:00 AM
02
10:00 AM
10
6:00 PM
18
3:00 AM
03
11:00 AM
11
7:00 PM
19
4:00 AM
04
12:00
12
8:00 PM
20
5:00 AM
05
1:00 PM
13
9:00 PM
21
6:00 AM
06
2:00 PM
14
10:00 PM
22
7:00 AM
07
3:00 PM
15
11:00 PM
23
KEYPAD CONTROL TONES (BEEPS)
A sounder is built into the keypad. If programmed, your system keypad may
sound for any of the following reasons:
S
Beeps for all keypresses.
S
Sounds a continuous tone during the Entry delay time.
S
Pulses when a day zone is violated while the system is disarmed.
S
Pulses when a FIRE zone has a trouble condition.
S
Beeps 3 times for trying to arm with the “Ready” light off, if “Force Arming”
has not been selected.
has not been selected.
S
Beeps for 1 second or emits a “ding-dong” sound for the “Chime” feature.
S
Beeps during an exit delay; beeps rapidly for the last 10 seconds of an exit
delay; and beeps 1 second at the end of the exit delay.
delay; and beeps 1 second at the end of the exit delay.
S
Pulses when the armed status changes and the AC power is off.
S
Pulses when the armed status changes and any zone(s) are bypassed.
S
Pulses when the armed status changes and a low battery is detected.
S
Pulses when the armed status changes and a Tamper condition is detected.
S
Beeps to indicate Telephone Line Cut, if selected.
S
Pulses when one or more of the following conditions are detected: Zone or
Box Tamper, Low Battery, AC Power Fail, or Expander trouble.
Box Tamper, Low Battery, AC Power Fail, or Expander trouble.
Entering a valid code will silence the keypad sounder when it is pulsing. The
arm/disarm state of your system will not change when entering a code to silence
a pulsing keypad sounder. Please contact your installer if a trouble condition
exists.
arm/disarm state of your system will not change when entering a code to silence
a pulsing keypad sounder. Please contact your installer if a trouble condition
exists.