eutech-instruments cyberscan con 11 conductivitytds meter Manual Do Utilizador
Instruction Manual
CON 11/110
40
8.2.3 P1.3: Selection of Automatic or Manual Temperature Compensation
This feature lets you select between Automatic Temperature Compensation (ATC)
and Manual Temperature Compensation (MTC). Meter default is ATC.
From measurement mode
and Manual Temperature Compensation (MTC). Meter default is ATC.
From measurement mode
1
Press SETUP key to enter Set Up menu.
2 Press the HOLD/ENTER keys until you view
parameter P1.3.
3
Press the HOLD/ENTER key again. The upper display
shows “ATC” and the lower display shows “YES” or
“NO”.
shows “ATC” and the lower display shows “YES” or
“NO”.
4 Press
MI/▲ or MR/▼ keys to select between
Automatic and Manual Temperature Compensation.
• “YES” activates the Automatic Temperature
• “YES” activates the Automatic Temperature
Compensation function.
• “NO” activates the Manual Temperature
Compensation function.
5
Press the HOLD/ENTER key to confirm selection and
to return to the subgroup menu.
to return to the subgroup menu.
6 Press the CAL/MEAS key to return to measurement
mode.
SETUP
YES
°C
ATC
SETUP
P 1.3
°C
ATC
SETUP
°C
HOLD
ENTER
MI
MR
Figure 33: P1.3-
Select Automatic or
Manual Temperature
Compensation