sentrol zxled12 Manual Do Utilizador
20
Trouble Conditions
When your system detects a trouble condition, the LED Control Station
lights the TROUBLE light.
lights the TROUBLE light.
Silencing Trouble
To silence the trouble sounder:
1.
Press .
2.
Enter passcode: .
Identifying Trouble Conditions
After you silence the trouble sounder, the trouble light will remain ON.
To view which zone(s) caused the zone condition, press the View Info
key (Key #1). The zone(s) that caused the condition will light steadily.
Bypassed zone(s) will flash.
To view which zone(s) caused the zone condition, press the View Info
key (Key #1). The zone(s) that caused the condition will light steadily.
Bypassed zone(s) will flash.
To identify the cause of a system trouble, press the View Info key (Key
#1) a second time. The following diagram displays the type of trouble
for each light that is illuminated.
#1) a second time. The following diagram displays the type of trouble
for each light that is illuminated.
If a trouble condition light does not turn OFF, contact
your Security Company Representative.
your Security Company Representative.
TROUBLE CONDITIONS
OFF
CANCEL
NOTE
READY
TROUBLE
FIRE
1
2
3
4
5
6
7
8
11
12
10
9
Panel Low Battery
AC Failure
Memory Error
Communication
Failure
Failure
Phone Line Failure
Bell Fault
RF Jamming
Call RPM Failure
Missing Keypad