sentrol zxlcd Manual Do Utilizador

Página de 64
11
System Not Ready
1.
Press the View Info key (Key #1) repeatedly to view zones not
ready.  The Control Station will display the zone condition and the
zone number.
2.
Secure zones not ready.  If you cannot secure a zone or do not want
to secure a zone, you may still turn the system ON by bypassing the
zone.  See Optional Features - Bypass and Force Arming.
Changing The Security Level
From the STAY or NIGHT mode
1.
Press
  ,                   or               .
If you turn your system ON in the AWAY mode, the Control Station
will display :
The examples in this manual  show the AWAY prompt.
The prompt may show STAY or NIGHT.
2.
Enter passcode:
3.
The Control Station will then begin exit countdown time.  It is safe to
exit the building during the countdown time.  If you exit during the
last 10 seconds of countdown time, the timer will restart the count-
down once.  If you turn your system ON in the AWAY mode and you
do not exit, the countdown will begin again only once so that you
may exit.
When the system is turned ON in the STAY or NIGHT
mode, you can switch between these modes as often
as you wish without turning your system OFF.  When
the system is turned ON in the AWAY mode, you must
turn your system OFF first before you can change
security levels.
OPERATING YOUR SYSTEM
TO ARM AWAY
ENTER PASSCODE
NIGHT
STAY
AWAY
NOTE
NOTE