sentrol zxlcd Manual Do Utilizador
9
1.
Close all doors and windows.
2.
Check for a Ready display on the Control Station. If you do not see
it, see Operating Your System - System Not Ready.
it, see Operating Your System - System Not Ready.
3.
Press
, or .
If you turn your system ON in the AWAY mode, the Control Station
will display:
will display:
The examples in this manual show the AWAY prompt.
The prompt may show STAY or NIGHT.
The prompt may show STAY or NIGHT.
4.
Enter passcode:
The Control Station will briefly display:
5.
The Control Station will then begin exit countdown time. It is safe
to exit the building during the countdown time. If you exit during
the last 10 seconds of countdown time, the timer will restart the
countdown once. If you turn your system ON in the AWAY mode
and you do not exit, the countdown will begin again only once so
that you may exit.
to exit the building during the countdown time. If you exit during
the last 10 seconds of countdown time, the timer will restart the
countdown once. If you turn your system ON in the AWAY mode
and you do not exit, the countdown will begin again only once so
that you may exit.
When turning your system ON in the STAY or NIGHT
mode, you may press the ENTER key during the
countdown time to cancel the countdown and turn
your system ON instantly. When you cancel the
countdown time, the entry time is also disabled. If
your front door is opened while the system is turned
ON, an alarm will occur immediately.
mode, you may press the ENTER key during the
countdown time to cancel the countdown and turn
your system ON instantly. When you cancel the
countdown time, the entry time is also disabled. If
your front door is opened while the system is turned
ON, an alarm will occur immediately.
A1 READY TO ARM
JAN 21 05:27:52
JAN 21 05:27:52
TO ARM AWAY
ENTER PASSCODE
ENTER PASSCODE
ARMED AWAY
Turning Your System ON
OPERATING YOUR SYSTEM
NIGHT
STAY
AWAY
NOTE
NOTE
READY TO ARM
ZX200/ZX210
ZX400/ZX410/ZX440F
AREA 1
ARMED AWAY
ARMED AWAY
ZX200/ZX210
ZX400/ZX410/ZX440F