sentrol zxlcd Manual Do Utilizador
27
Communicator Test
Your system must be monitored by a Central Station
to perform this test. This test will take a while to
perform.
to perform this test. This test will take a while to
perform.
This test is used to verify that your system is communicating with the
Central Station.
Central Station.
To perform a communicator test:
1.
Press
. The Control Station will display:
2.
Enter passcode:
The Control Station will display:
3.
Press
. The Control Station will briefly display:
4.
If the test passes, the Control Station will sound four (4) beeps
when the test is completed. The Control Station will display:
when the test is completed. The Control Station will display:
If the test fails, a Communications Failure trouble condition results
several minutes later. The Control Station will display:
several minutes later. The Control Station will display:
TESTING
COMMUNICATIONS
COMMUNICATIONS
COMM TEST
PASSED
PASSED
COMM FAILURE
OFF TO SILENCE
OFF TO SILENCE
FOR TESTS
ENTER PASSCODE
ENTER PASSCODE
ENTER 1-6 TO
SELECT A TEST
SELECT A TEST
TESTING YOUR SYSTEM
NOTE
8
4